I set this up so that I can ramble on about my lead (and plastic) mountain, my endless gaming, miniature, and terrain projects, and other

insights into various games.

You'll find lots of 'pretty pictures', various modeling techniques, and hopefully some inspiration for your own lead pile. You're bound to

find something amongst my games and photos that interests you.

Sit back, open a cold one, and enjoy.

If you need something, feel free to contact me at: dglennjr at yah00 dot com

Sunday, September 30, 2012

Roadside Construction Zone Barrels

I whipped out some of these Construction Zone Barrels for an upcoming Zombie game to add some additional detail to some roadblocks.
I constructed these for 28mm miniatures, but you can easily scale them down (or up), depending on your scale of miniatures. (15mm, 20mm and etc.)
Here's how I made them (it is pretty simple, really.):
List of Materials:
5/8" diameter Metal Washer (Bottom)
1/2" diameter wood dowel x 3/4" high
Lego 1x1 round plate: Translucent Yellow or Orange
(You can order them individually through www.Lego.com in the 'Pick a Brick' section.)
White Glue
(Optional standard staple, see below)
Highway Orange Spray Paint
White paint (or white vinyl pinstriping could be used.)
Black spray paint (for base)
(Optional black (or yellow or orange) paint for the light battery box, see below)

1.  Spray paint the base washer black to represent the black rubber barrel ring.
2.  Spray paint the dowels with the highway orange paint.
3.  (optional) Paint the bottom of each round Lego with a bit of black to represent the battery box. (or orange, or yellow, depending on what you're modeling. The ones in my area are black boxes.)
4.  Paint the horizontal white striping on the barrels at about the 1/3 and 2/3 mark of the barrel height. (every 1/4" on the barrel)  "yes, hand-painting straight lines on a round dowel are possible with a steady hand."
5.  Glue the light to one edge of the top of the barrel.
6.  Glue the finished barrel to the washer.
7.  Now you have a lighted construction barrel.

Here is a typical Highway Construction Barrel:
***Some barrels have a molded handle on top.  I chose not to model this for simplicity. However, if you are really anal-retentive, you could easily make two small holes in the top of the barrel (before painting) and put/glue a standard staple in the top, letting it stick out a little to represent the handle.  Then, when you spray paint the barrel, the orange paint will give some thickness to the handle and look like it is molded onto the barrel.  

Not all barrels have to have lights. You can leave them off every other one or more.  Add some construction or warning signs and you've got a good looking detour or roadblock.

Here are the completed barrels with some recently acquired Police/Security Forces. 

I think these barrels will be convincing in my next Zombie Skirmish game.

No comments:

Post a Comment